Skip to content
01632 960863quotes@kestrow.co.ukMonday to Thursday 7:30 to 17:00, Friday 7:30 to 13:00Drawings: STEP · DXF · PDF

Capability 03 / Fabrication

Fabrication and welding

Sheet and plate cut, folded and welded under the same roof as the machine shop, so a frame can be stress relieved, machined after welding and finished without leaving our hands.

A welder in a helmet and leather apron TIG welding a large steel disc
Fig. 1.1TIG welding a flange
A CNC plasma torch cutting shapes from a steel plate on a slatted cutting bed
mm laser bed
3,000
tonne press brake
170
welding bays
6
tonne crane, under hook
2

The kit

Cut, fold, weld, machine.

Nested on the laser straight from your DXF, folded on a CNC brake with the bend allowances proven on a first-off, then welded in fixtures we make ourselves.

A cut-off disc cutting through steel plate, a fan of sparks below
Fig. 3.1Cutting plate to length
Table 3Fabrication: equipment (illustrative)
ProcessEquipmentCapacity
Laser cuttingFibre laser, 6 kW3,000 × 1,500 mm sheet; mild steel to 20 mm, stainless to 15 mm, aluminium to 12 mm
Plasma cuttingCNC plasma tablePlate to 40 mm, 3,000 × 1,500 mm
FoldingCNC press brake, 170 t3,100 mm long; mild steel to 10 mm
WeldingMIG and TIG, 6 baysSteel, stainless and aluminium; pulsed TIG for thin stainless
SectionsBandsaw and drilling lineBox, angle, channel and tube to 400 mm

What we hold

Square, flat and to size.

Welding to the symbols and specification on your drawing, with weld maps and inspection records kept with the job.

A gloved fabricator grinding a weld along a steel beam, sparks spraying across the workshop
Fig. 4.1Dressing welds on a beam
Table 4Fabrication: capability (typical)
ParameterFigure
Cut profiles±0.1 mm (laser), ±0.5 mm (plasma)
Folded parts±0.2 mm on flanges, ±0.5° on angles
Welded fabrications±1 mm under 2 m before machining
Largest fabrication4 × 2 × 2 m, 2 t
Weld inspectionVisual to your specification; dye penetrant in-house; other testing through partners
After weldingStress relief through partners; machined in-house

Machined weldments

One supplier, from plate to finished frame.

Most fabrications that come to us need machining after welding: bearing faces, datum pads, tapped holes. Doing both here takes a supplier, two deliveries and a week out of the job, and puts one name on the inspection report.

Gloved hands welding a steel frame, sparks and smoke rising from the joint
Fig. 5.1Tacking a frame
A gloved hand holding a steel bar to a grinding wheel as sparks fly
Fig. 5.2Deburring by hand

Request a quote

Got a drawing? Send it over.

STEP, DXF or PDF, any quantity. An engineer reads every one, and you'll have a quote within three working days.

  • STEP
  • DXF
  • PDF
  • IGES
  • Parasolid