Skip to content
01632 960863quotes@kestrow.co.ukMonday to Thursday 7:30 to 17:00, Friday 7:30 to 13:00Drawings: STEP · DXF · PDF

About Kestrow

Redditch engineering, since 1987

Redditch made the world's needles, fish hooks and springs for two hundred years. We started in that trade's long shadow, two toolmakers and a manual lathe, and we still work to the same idea: precision is a habit, not a sales line.

An old manual lathe under a work lamp, in a workshop lit warm
Fig. 1.1The first lathe, still in use
A green manual lathe, its carriage, chuck and tool post close up
people
64
sq ft, one site
40,000
CNC machines
22
apprentices in training
9

Illustrative figures: Kestrow Precision is a demonstration.

How we got here

Thirty-eight years, one bar at a time.

  1. 1987

    Two toolmakers rent a unit in Redditch with one manual lathe, a mill and a surface grinder, making press tools and spares.

  2. 1996

    The first CNC machining centre. Toolmaking gives way to subcontract machining for local hydraulics firms.

  3. 2004

    The move to Kestrow Works, and the first sliding-head lathe for small turned parts in volume.

  4. 2011

    The fabrication shop opens, so frames can be welded and machined without leaving the site.

  5. 2016

    Five-axis machining and the temperature-controlled inspection room with its CMM.

  6. 2024

    A pallet system for lights-out running, and our apprentice programme doubles in size.

What we believe

A part is only as good as the record that proves it, and a supplier is only as good as its word on the day it said.

Fig. 4.1The first lathe, still in use

How we work

Four habits we hire for.

  • Read the drawing

    Every drawing is read by an engineer before it is quoted, and every question asked before the material is cut.

  • Say it early

    If a date is at risk, you hear from us when we know, not when it's due.

  • Prove it

    Measured, recorded and reported: what we say about a part, the report shows.

  • Train our own

    Most of our setters and inspectors started here as apprentices.

Kestrow Works

One site, every process.

Milling, turning, fabrication, finishing, inspection and assembly on one site in Redditch, ten minutes from the M42 and in reach of the whole of the Midlands. Customers are welcome to visit, audit and watch their first articles measured.

A face mill with indexable inserts cutting across the top of a steel block
Fig. 6.1Face milling a steel block
A technician in safety glasses working on a machine in the workshop
Fig. 6.2Maintenance on the line

Request a quote

Got a drawing? Send it over.

STEP, DXF or PDF, any quantity. An engineer reads every one, and you'll have a quote within three working days.

  • STEP
  • DXF
  • PDF
  • IGES
  • Parasolid