Guide · 17 September 2026 · 7 min read
A planned maintenance checklist for food conveyors
The eight checks our engineers do on every visit, written so your own team can do the weekly ones.

By Dean Holroyd, service manager
Most breakdowns we're called to were visible a fortnight earlier: a belt tracking to one side, a bearing running warm, a guard that's been taken off and put back with two bolts instead of four.
Weekly: check belt tracking and tension, listen to the bearings, test every emergency stop and pull wire, and look at the scraper blades. Monthly: check drive chains and sprockets, gearbox oil, and the condition of wear strips.
Write it down. Our engineers log every visit against the machine's serial, and you can see the same history on the report we send after each visit.


