ThrostleEngineeringGet a quote

Guide · 28 October 2026 · 6 min read

IP69K explained: what washdown rating your conveyor really needs

IP66, IP67 and IP69K are not a ladder. What each one tests, and which parts of a line need which.

A clean processing room with a stainless control cabinet

By Priya Lund, design engineer

Ask for IP69K on everything and you'll pay for it twice: once on the quote and again every time a sealed motor has to be replaced rather than repaired. Ask for too little and water finds its way into a gearbox within a month of high-pressure cleaning.

The second digit of an IP rating is about water. IP66 means powerful jets from any direction; IP67 means a temporary dip under a metre of water; IP69K means close-range, high-pressure, high-temperature spray, the kind a hygiene team uses at the end of a shift. They test different things, so a part rated IP69K isn't automatically IP67, and the other way round.

On most food lines we split the line into zones. Where product is open and the hoses go, drives and sensors are IP69K. Away from the wet end, IP66 is plenty and much easier to maintain. We mark the zones on the layout drawing so everyone, including your hygiene manager, agrees before anything is built.

If you're not sure which you have, the rating is on the motor plate. Send us a photograph and the serial from the conveyor's own plate and we'll tell you.

Ask an engineerSpares and service